• <s id="g602m"></s>
  • <menu id="g602m"></menu>
  • <menu id="g602m"></menu>
  • <div id="g602m"></div>
    <menu id="g602m"><button id="g602m"></button></menu><nav id="g602m"></nav>
  • <div id="g602m"></div>
    <menu id="g602m"><tt id="g602m"></tt></menu>
    <div id="g602m"></div><optgroup id="g602m"></optgroup>
  • <s id="g602m"></s><rt id="g602m"><tt id="g602m"></tt></rt>
  • <menu id="g602m"><tt id="g602m"></tt></menu>
    <object id="g602m"></object><s id="g602m"></s>
  • <s id="g602m"></s>
    WELCOME TO WUXI CITY HUIFENG ELECTRONIC.CO.LTD!
    National Consultative Hotline 0510-85310683

    PRODUCT CENTER

    Contact US

    Address:No.20 16-3 plot,5th,Shuofang Industrial Concentrated Zone, New District, Wuxi 214142, Jiangsu, P.R.China
    TEL:0510-85310683
    Website:www.yadroid.com
    Fax:0510-85310683
    Mailbox:tdh@hfpzt.com
       wxhfscb@163.com

    Professional solutions for piezoelectric ceramics

    publish:HUIFENG  time:2017年06month23day

    It is believed that you will not feel strange to the web product of the piezoelectric ceramic film, but whether it has already had a comprehensive understanding and understanding has not yet reached this level. Therefore, based on this, next, will continue the topic, only in the content, is not before, so that to promote the learning process of the product.
    1. why do we use piezoelectric ceramic chips to make buzz pieces, why not weld them to piezoelectric ceramics? In addition, is the calculation of the capacitance of the piezoelectric ceramic chip the same as that of the ceramic capacitor?
    If this problem occurs, it is caused by the mismatch between the welding material and the solder wire. The capacitance calculation of piezoelectric ceramic sheet is the same as that of ceramic dielectric capacitor, and the calculation formula of plate capacitor is adopted. So on question two, the answer is yes.
    2. if a piezoelectric ceramic chip wants to vibrate, what are the simple ways? In addition, how much voltage can it generate when it's mechanical vibration?
    If you want the piezoelectric ceramic to vibrate, the simple way is to connect it to the secondary AC voltage of a small transformer. The mechanical vibration of a piezoelectric ceramic sheet can produce a voltage range of 0.1 to 0.15V, which is very small.
    3. in the transducer, which thickness of the piezoelectric ceramic is thick and radial, which efficiency is higher?
    In the transducer, the thickness direction vibration and radial vibration of the piezoceramic chip will be compared with the two, then from a professional point of view, it is the former, that is, the efficiency of the vibration of the thickness is higher. However, if conditions are limited, it is possible that there is only one radial vibration. So, in general, the answer to this question is to vibrate in the direction of thickness, but if there are special cases, that's not necessarily true.

    国产婷婷视频在线观看_天天综合网网欲色天天影视_97碰碰碰人妻无码视频_番里h肉3d动漫在线观看